TSHL40/125

• material width max.: 400 mm
• material thickness max.: 4,6 mm
• shear resistance: 400 N/mm²
• pressure force at 250 bar: 125 kN
• no. of strokes/min. (unloaded) depending on aggregate, max.: 80
• stroke height: 30 mm
• shear angle: 2,5 °
• mounting angle: optional

TSHL50/125

• material width max.: 500 mm
• material thickness max.: 4,6 mm
• shear resistance: 400 N/mm²
• pressure force at 250 bar: 125 kN
• no. of strokes/min. (unloaded) depending on aggregate, max.: 80
• stroke height: 30 mm
• shear angle: 2,5 °
• mounting angle: optional

TSHL65/125

• material width max.: 650 mm
• material thickness max.: 4,4 mm
• shear resistance: 400 N/mm²
• pressure force at 250 bar: 125 kN
• no. of strokes/min. (unloaded) depending on aggregate, max.: 80
• stroke height: 40 mm
• shear angle: 2,5 °
• mounting angle: optional

TSHL80/125

• material width max.: 800 mm
• material thickness max.: 4,4 mm
• shear resistance: 400 N/mm²
• pressure force at 250 bar: 125 kN
• no. of strokes/min. (unloaded) depending on aggregate, max.: 80
• stroke height: 50 mm
• shear angle: 2,5 °
• mounting angle: optional

TSHL16/125

• material width max.: 160 mm
• material thickness max.: 4,8 mm
• shear resistance: 400 N/mm²
• pressure force at 250 bar: 125 kN
• no. of strokes/min. (unloaded) depending on aggregate, max.: 120
• stroke height: 20 mm
• shear angle: 2,5 °
• mounting angle: optional

TSHL25/125

• material width max.: 250 mm
• material thickness max.: 4,8 mm
• shear resistance: 400 N/mm²
• pressure force at 250 bar: 125 kN
• no. of strokes/min. (unloaded) depending on aggregate, max.: 100
• stroke height: 22 mm
• shear angle: 2,5 °
• mounting angle: optional

TSHL32/125

• material width max.: 320 mm
• material thickness max.: 4,8 mm
• shear resistance: 400 N/mm²
• pressure force at 250 bar: 125 kN
• no. of strokes/min. (unloaded) depending on aggregate, max.: 80
• stroke height: 25 mm
• shear angle: 2,5 °
• mounting angle: optional