| Quickfinder |
|
|
|
|
GSW Air Feeds | Air Feeds with electro-pneumatic initiation
material widths: 50 - 610 mm
stroke lengths: up to 300 mm
material thicknesses: up to 4,0 mm | |  |
starting at 851,00 Euro |
GSW Roll Feed 25/60-Series | with motion control
driven by a three-phase A.C. servo-motor
feeding tolerance ± 0,1 mm
material width: max. 250 mm
material thickness: max. 2,5 mm
material cross-section: max. 250 x 1,8 mm | |  |
11.430,00 Euro |
GSW Roll Feed WVE 200/58-Series | with motion control
driven by a three-phase A.C. servo-motor
feeding tolerance ± 0,1 mm
material width max. 200 mm
height adjustment ± 50 mm
| |  |
9.720,00 Euro |
GSW Roll Feed WVE 200/58-Series | without motion control, without motor
material width max. 200 mm
height adjustment ± 50 mm | | |
3.600,00 Euro |
GSW Air Feed ZVP 32/320/12-Series (used) | material width: max. 330 mm
material thickness: max. 1,5 mm
stroke length: 320 mm
push force: 2.300 N
clamping force, fixed grippers: 2.300 N
clamping force, movable grippers: 12.000 N
Equipment:
quick stroke adjustment
hydraulic damping
hinged cover, electronically secured
fine adjustment ± 0,7 mm
catenary at entry
cabinet height-adjustable by ± 75 mm; manually via 4 individual spindles
electrical control (press controls feeder - feeder controls press) | |  |
7.650,00 Euro |
GSW pneumatic Shear TSPL 06/06-Series | for coil strip and scrap webbing
material width: 60 mm
material thickness: 1,1 mm
yield strength: 400 N/mm²
pressure force: 6 kN | |  |
1.830,00 Euro |
GSW Roll Feed Ecomonic Line | roll feed for material thicknesses of max. 1,5 mm
with electrical control
4 models for material widths: 50 mm, 100 mm, 220 mm and 320 mm
highest possible feeding precision
feeding accuracy: ± 0,025 mm
interface easy to operate
| |  |
8.500,00 Euro |
GSW Air Feed | Air feeds with mechnical initiation for:
material widths 50 - 300 mm
stroke length up to 300 mm
and material thicknesses of up to 3,8 mm
| |  |
from 740,00 Euro |
GSW Coil Reel LHM 300/1000-Series (used) | load capacity: 300 kg
material width: 280 mm
outer coil diameter: 1.000 mm
expansion range: 250 - 545 mm
mandrel height: 760 mm
- pay-off speed (constant): 17,5 U/min.
- without mechnical disc brake
- mechanical bevel gear expansion
- new electrical control with loop controller via initiator
- 12 months guarantee | |  |
2.800,00 Euro |
GSW electrical Scrap Shear, MSC 200 - Series | - material width: 200 mm
- material thickness: 2,0 mm
- cutting speed: up to 90 stroke/min
- drive power: 0,75 kW
- height at which material is fed into the shear: 280-940 mm
- shear-width x -depth: 432 x 535 mm
- motor-drive with gearing
- stroke independent shredding of sheet-metal strips
- shortest set-up times
- wings and fixed conter-blade made from special steel
- funnel where material is being fed into shear
- cover for scrap output area
- stable base frame, mobile, height adjustments made via column guides
- material feeding angle smoothly adjustable
- drive overload protection
- input voltage: 230/400 V, 50 Hz | |  |
3.400,00 Euro |
|
|
|
